Cargo Elevator Square Push Button AN112G01

Product Overview

The AN112G01 is a square cargo elevator push button built for the heavy end of the button range—the kind of call point that takes gloved hands, trolley handles and shoulders steadying a pallet. It fits the 30.5 x 30.5 mm opening left by the old unit, so a panel that is otherwise sound can stay in service instead of being cut about. Working voltage is DC24V, with a red luminous word piece in stainless steel hairline and a plastic or stainless steel frame and stainless steel panel. Installation is front embedded with reverse card holder fixed, for panel thickness 2–4 mm. Keep one on the van or on the shelf and a failed call point no longer holds up a delivery. Each unit is supplied brand new and original, with a one-year warranty, 1 pc minimum order and 1–3 working day delivery from stock. Packing is carton or wooden case, shipped by DHL, TNT, FedEx or UPS.

Specifications

Frame, Finish and Panel Fit

• Plastic frame — the lightest surround for standard car panels where the button sits in a plastic face plate, keeping the assembly easy to fit.
• Stainless steel frame — a rigid surround for panels that take repeated knocks from trolleys, pallets and cleaning gear, helping protect the button in busy goods lifts.
• Stainless steel panel — a full brushed metal face that stays consistent from car to car across a fleet.
• Stainless steel hairline word piece — floor numbers and symbols sit in brushed metal instead of a printed insert that rubs away, so markings stay legible.
• Red illumination — the active floor stays readable from across a goods lobby or in the low light of a machine area.
• DC24V working voltage and a 30.5 × 30.5 mm opening match the listed AN112G01 / DC24V specification, helping technicians confirm the elevator push button matches the panel before installation.
• Front embedded installation with reverse card holder fixing suits 2–4 mm panels, matching the listed mounting method for cargo elevator control panels.

Applications

• Car operating panels on cargo elevators in warehouses, factories and wholesale markets, where goods traffic wears call points quickly and replacement buttons need to match the existing panel cutout.
• Manipulator stations on freight lifts, reached across a cage or from a loading bay, where the compact square AN112G01 face and 30.5 x 30.5 mm opening fit typical cargo control layouts.
• Goods lifts in shopping centres and logistics buildings that run long shifts through the day; DC24V operation and a red luminous word piece keep button status easy to read during repeated use.
• Service vans, parts shelves and stock rooms — a spare on hand keeps a repair moving when a call point fails on site.
• Existing cargo elevator push button panels and older control stations being refreshed with a 2–4 mm panel thickness, front embedded installation and reverse card holder fixing; check AN112G01, DC24V and frame option before ordering.

Installation and Replacement Steps

1. Confirm the replacement matches AN112G01 / DC24V before isolating the lift. This cargo elevator square button fits a 30.5 × 30.5 mm opening and 2–4 mm panel thickness, with front embedded installation and reverse card holder fixing.
2. Lock out the lift and remove the old button from the car operating panel. Keep the wiring accessible and label connections if needed.
3. Clean the opening and check the panel edge for burrs, old sealant or cracks. A flat, damage-free edge helps the square face sit correctly.
4. Seat the AN112G01 into the opening from the front so the square face sits flush. Do not force it; the body should pass through without bending the panel.
5. From behind, fit the reverse card holder to lock the body. No extra bracket is needed for this elevator push button.
6. Reconnect the DC24V supply, restore power and press once to confirm the red lamp lights and the call registers.

Ordering Information

FAQ